Home  >   Category Additional Information  >
CONFORMANCE TO AUSTRALIAN STANDARDS

Australian Standard AS/NZS 4602:1999 High Visibility Safety Garments.

Classification of Garments
The garments specified in this standard are classified into one of the following:
· Class D - a garment designed for outdoor daytime use only, comprising fluorescent or other non-retroreflective high visibility material.
· Class N - a garment designed for night-time use only, comprising retroreflective elements on an unspecified background.
· Class D/N - a garment designed for both day and night use, comprising retroreflective elements on a fluorescent or other non-retroreflective high visibility background material.

Class D Garments
These garments are intended to provide the wearer with high visibility under daylight viewing conditions in outdoor situations.
· Fluorescent materials shall be made from materials that meet the requirements of Class F in AS/NZS 1906.4. Colours are normally red-orange or lime yellow.
· Non-fluorescent materials. Where safety requirements require a garment to be made from a material which is not capable of taking a fluorescent pigment e.g. certain natural fibres, a non-fluorescent colour as specified in AS/NZS 1906.4 may be used in lieu.
· Garment design - Class D garments shall comprise a garment or combinations of garments of any desired type or style which as a minimum, encircles the upper torso. There shall be a minimum visible area of 0.4m2 of material meeting the requirements of either fluorescent or non-fluorescent materials.
· Retroreflective Materials - Not required for this class.


Class N Garments
These garments are intended to provide the wearer with high visibility at night when viewed under retroreflected light, such as by drivers of vehicles using headlight illumination. The colour of the background is not specified.
· Retroreflective materials used on Class N garments shall meet the requirements for Class R material specified in AS/NZS 1906.4. Material strips must not be less than 50mm wide to at least the minimum patterns specified. Retroreflective patches, words, symbols, and the like shall be regarded as additional to, and not replacing, the specified patterns of retroreflective strips.
· Garment design - Class N garments shall comprise a garment or combinations of garments of any desired type or style which as a minimum, encircles the upper torso down to waist level. Strips of retroreflective material shall be applied as specified below.

Class N Minimum Requirements

(a) Standard minimum requirement

Front Rear 1 Rear 2
  Style 1 Style 2

(b) Alternative with second horizontal loop

Front Rear
Style 3  

Top view showing over-shoulder strips.


Class D/N Garments
These garments are intended to provide the wearer with high visibility under both daylight and night-time viewing under retroreflected light. These garments combine the requirements of both Class D and N.

Standards Referenced
AS/NZS 1906 - Retroreflective materials and devices for road traffic control purposes.
AS/NZS 1906.4 - Part 4: High visibility materials for safety garments.

For a copy of this standard see www.standards.com.au
Elliott Australia safety vests are manufactured to meet the requirements of AS/NZS 4602:1999.

BACK TO HIGH VISIBILITY APPAREL